Do you repair pool pumps in Yorba Linda?
Yes — and Yorba Linda pads are usually the interesting ones. Pool, spa and water feature on one pad means more than one pump, a bank of valves, and a fault that is rarely where the symptom is. We diagnose the pad as a system.
Licensed California pool contractor, CSLB #1075061. Rated 4.9 from over 365 reviews.
Pool Pumps in Yorba Linda
Yorba Linda lots are large and the pools on them tend to match. East Lake Village, Vista Del Verde, Travis Ranch and Bryant Ranch have a high proportion of pools with an attached spa, a spillway or a separate water feature. That means more than one pump, a set of actuated valves, and an equipment pad that is often a long way from the water it serves.
On a pad like that the symptom is frequently nowhere near the cause. A spa that will not hold its jets can be a booster pump, a valve actuator, a suction-side air leak or a partially blocked line, and replacing the pump first is an expensive way to find out it was none of them. We work through the pad as a system before quoting parts, because guessing on a three-pump setup gets costly fast.
What goes wrong on a multi-pump Yorba Linda pad
What you are seeing
- One pump on the pad running while another sits dead
- Spa jets that have lost their pressure, or a spillway gone to a trickle
- Valve actuators that click and do not move
- Bearing noise or a leak at any one of several pumps
- A pump that short-cycles or trips only when the spa is called
- Long runs from pad to pool that will not hold prime
What we install and repair
We install Pentair IntelliFlo VSF and Jandy FloPro variable-speed pumps, along with the booster pumps and actuated valves that a pool, spa and feature on one pad needs. We also tie pads into Pentair IntelliCenter and Jandy iAquaLink automation.
- Pentair IntelliFlo VSF and Jandy FloPro variable-speed pumps
- Booster pumps and dedicated water-feature pumps
- Valve actuators and manifold repairs on multi-body pads
- Automation integration — Pentair IntelliCenter and Jandy iAquaLink
About pump work
“They replaced my pool automation system to link, which is wonderful. Recently they came out and correctly diagnosed a leak in my filter pump. Alec and Albert are very honest, responsive, and they do excellent work, at reasonable prices.”
“I needed a new pump installed and an upgrade to my control box. I'm very happy with the automated valves and how all the equipment is now connected to my phone. I can switch from pool and spa mode, turn the heater on and off, control the temperature and control the lights.”
Opens in a new window.
More for Yorba Linda Pool Owners
- Pool Heater Repair in Yorba Linda — the other half of the equipment pad.
- Pool Repair & Remodeling in Yorba Linda — resurfacing, tile, coping and decking.
- Pool Pump Repair & Installation — the county-wide page, with the full detail.
- All Equipment Services — filters, salt, automation and lighting too.
Common Questions
My spa has lost pressure but the pool is fine. Is the pump gone?
We have three pumps on one pad. Do they all have to be replaced together?
Can you connect the pad to my phone?
Do you charge extra for the drive out to Yorba Linda?
Are you licensed and insured?
Pool Pump Trouble in Yorba Linda?
We will come out, diagnose it properly and give you a real number. No travel fees, no pressure.