Do you repair pool heaters in Yorba Linda?
Yes — and in Yorba Linda the call is often about the spa. “It takes too long to heat” is usually a sizing answer rather than a fault. We will tell you which one you have before selling you a heater.
Licensed California pool contractor, CSLB #1075061. Rated 4.9 from over 365 reviews.
Pool Heaters in Yorba Linda
The heater call we take most often in Yorba Linda is not really a repair call at all. It is that the spa takes too long, and on the larger East Lake Village and Bryant Ranch properties that is usually about sizing rather than a fault. A 250,000 BTU heater on a big pool with an attached spa will heat both of them eventually. It will not heat the spa quickly, and no amount of servicing changes that.
When it is a genuine fault, the volume works against you. A large body of water hides a partial failure for a long while, so the heater is often well down the road before anyone notices anything is wrong. We check the exchanger, the flow rate and the gas supply together rather than reading the error code off the board and stopping there, because on a pool this size the code is usually a symptom of something upstream.
Yorba Linda heater symptoms worth a call
What you are seeing
- A spa that takes far longer to reach temperature than it used to
- The heater running more or less constantly and never hitting setpoint
- Short-cycling — firing and dropping out over and over
- Codes that clear on a reset and are back inside a day
- Corrosion showing at the exchanger or the header
- Automation calling for heat and getting no response from the pad
What we install and repair
We install Jandy JXi and Pentair MasterTemp heaters, usually at 400,000 BTU on a Yorba Linda pool with an attached spa, and we tie them into Pentair IntelliCenter and Jandy iAquaLink automation so the spa can be called ahead of time.
- Jandy JXi and JXiQ 400,000 BTU heaters, three-year warranty as an authorized Jandy service provider
- Pentair MasterTemp 400 heaters
- Correct sizing for a large pool with an attached spa, rather than replacing like for like
- Automation integration so the spa can be brought up remotely
About heater work
“They did a pool heater exchange. What I liked the most was Mike providing estimates of all options we talked about. They weren't pushy on selling what they wanted.”
“Hired ACE Pool Repair & Remodel for a pool heater installation. They installed a new Jandy JXiQ 400K BTU pool heater and also addressed wiring and electrical-related issues.”
Opens in a new window.
More for Yorba Linda Pool Owners
- Pool Pump Repair in Yorba Linda — the other half of the equipment pad.
- Pool Repair & Remodeling in Yorba Linda — resurfacing, tile, coping and decking.
- Pool Heater Repair & Installation — the county-wide page, with the full detail.
- All Equipment Services — filters, salt, automation and lighting too.
Common Questions
Our spa takes forever to heat. Is the heater failing?
What size heater does a big pool with a spa need?
Can I turn the spa on before I get home?
Is there a travel charge out to Yorba Linda?
Are you licensed and insured?
Pool Heater Trouble in Yorba Linda?
We will come out, diagnose it properly and give you a real number. No travel fees, no pressure.